This is an example
of what your final topology should look like.
Instructions:
1. Start Packet Tracer using Realtime mode.
- Options -> Preferences
- Enable “Show Link Lights”
- Disable “Hide Device Label”
2. Configuring the DHCP Server
Add a server.
Global Settings:
· Change the Display Name to “DHCP Server”
· Set the Gateway to 172.16.0.1
FastEthernet:
· Set the IP address to 172.16.0.10
· Set the Subnet Mask to 255.255.0.0
HTTP:
· Set HTTP Service and HTTPS Service to Off
DHCP:
· Set the Default Gateway to 172.16.0.1
· Set the DNS Server to 172.16.0.11
· Set the Start IP Address to 172.16.0.100
DNS:
· Set the Service to Off
Email:
· Set the SMTP Service and POP3 Service to Off
2. Configuring the DNS Server
Add a server.
Global Settings:
· Change the Display Name to “DNS Server”
· Set the Gateway to 172.16.0.1
FastEthernet:
· Set the IP address to 172.16.0.11
· Set the Subnet Mask to 255.255.0.0
HTTP:
· Set HTTP Service and HTTPS Service to Off
DHCP:
· Set the Service to Off
DNS:
· Entering the www.cabrillo.edu Domain Name
· Enter for the Domain Name www.mapua.edu
· Enter for IP Address 172.16.0.20
· Click Add
· Entering the www.internal.com Domain Name
· Enter for the Domain Name www.internal.com
· Enter for IP Address 172.16.0.30
· Click Add
Email:
· Set the SMTP Service and POP3 Service to Off
3. Configuring the www.mapua.edu Web Server
Add a server.
Global Settings:
· Change the Display Name to “Web Server: www.mapua.edu”
· Set the Gateway to 172.16.0.1
FastEthernet:
· Set the IP address to 172.16.0.20
· Set the Subnet Mask to 255.255.0.0
DHCP:
· Set the Service to Off
DNS:
· Set the Service to Off
HTTP
· Set the both the HTTP and HTTPS Service to On
· Change the sentence, “
Welcome to Advance Technology Group, Opening doors to new opportunities. Mind Wide Open.” to “
Welcome to Advance Technology Group, public web page!” You may add other information as well.
Email:
· Set the SMTP Service and POP3 Service to Off
4. Configuring the www.internal.com Web Server
Add a server.
Global Settings:
· Change the Display Name to “Web Server: www.internal.com”
· Set the Gateway to 172.16.0.1
FastEthernet:
· Set the IP address to 172.16.0.30
· Set the Subnet Mask to 255.255.0.0
DHCP:
· Set the Service to Off
DNS:
· Set the Service to Off
HTTP:
· Change the sentence, “
Welcome to Advance Technology Group. Opening doors to new opportunities. Mind Wide Open.” to “
This is the corporate internal network!” You may add other information as well.
5. Configuring the mail.mapua.edu Email Server
Add a server.
Global Settings:
· Change the Display Name to “Email Server: mail.mapua.edu”
· Set the Gateway to 172.16.0.1
FastEthernet:
· Set the IP address to 172.16.0.40
· Set the Subnet Mask to 255.255.0.0
DHCP:
· Set the Service to Off
DNS:
· Set the Service to Off
HTTP:
· Set HTTP Service and HTTPS Service to Off
Email:
- Set SMTP and POP3 Service to On.
- Set the domain name to mail.mapua.edu
- Setup three user accounts as follows:
| Users | Password |
| user1 | datacom1 |
| user2 | datacom2 |
| user3 | datacom3 |
6. Configure Two Client Computers using DHCP
Add two client computers.
Global Settings:
· Change the Display Names to “Dynamic 1” and to “Dynamic 2” respectively
· Set the Gateway/DNS to DHCP
FastEthernet:
· Set the IP Configuration to DHCP
6. Configure One Client Computers using Static IP Addressing
Add two client computers.
Global Settings:
· Change the Display Name to “Static”
· Set the Gateway/DNS to Static
- Set Gateway to 172.16.0.1
- Set the DNS Server to 172.16.0.11
FastEthernet:
· Be sure the configuration is set to Static
· Set the IP address to 172.16.0.90
· Set the Subnet Mask to 255.255.0.0
7. Configure Email Configuration for Clients
8. Adding switches
- Add two switches.
- Connect the servers to one switch using a straight-through cable.
- Connect the client computers to the other switch using a straight-through cable.
- Interconnect the two switches using a crossover cable.
9. Verify connectivity
- Ping (ICMP)
- From a client computer use the Desktop Command prompt to ping the other client computers and the servers.
- Example: From the Dynamic 1 client, C> ping 172.16.0.20
- The first one or two pings may fail, but you should receive a reply on the later pings. This is due to the ping timing out while the ARP process takes place.
- Web Browser (HTTP)
- On the client computers use the Desktop Web Browser, enter the URLs of the Web Servers www.cabrillo.edu and www.internal.com.
- You should see the web pages that you created on these servers.
- Email (SMTP)
- From client computer (Dynamic 1), compose an email (from Desktop tab) to another client computer (Static). To: user3@mail.mapua.edu
- Upon sending the email, check if email was received by Static PC by clicking the email icon (Desktop tab), and clicking the Receive button after.
Please approach your instructor to verify connectivity of devices
Instructor’s Signature:
__________________________________________
10. Using Simulation Mode
Click on Simulation.
Note: To reset a simulation, click on “Reset Simulation”
Click on Edit Filters
· Choose Show All/None so that all the boxes (protocols) are unchecked.
· Select (check) the following protocols: DHCP, ICMP, HTTP, DNS, HTTPS, SMTP
Web Browser (HTTP)
· On the client computers use the Desktop Web Browser, enter the URLs of the Web Servers http://www.mapua.edu or http://www.internal.com.
· Click on Auto Capture/Play (automatically forwards the packets) or Capture Forward (must keep clicking to advance the packets)
DHCP
· Reset the simulation by clicking on “Reset Simulation”
· To view DHCP, on one of the “Dynamic “client computers using DHCP go to the Desktop Command prompt.
· To have the client computer ask for new IP address and other information from the DHCP server, enter the command: C> ipconfig /renew
Email
· Reset the simulation by clicking on “Reset Simulation”
· To view email, click on one of the client computers sending email to another client computer.
· Click on Auto Capture/Play (automatically forwards the packets) or Capture Forward (must keep clicking to advance the packets)
IF I USE BRIDGE FOR CONNECTING BETWEEN TWO SWITCHES.........i.e. THE POSSIBLE.............WAY TO CONNECT.
ReplyDelete